Advertisement
XL-V163TN/V 1 64BK
XL-V263TN/V264BK
@ RANDOM
Lights in RANDOM
MODE.
@ EDIT
Lights during editing recording.
{EDIT AUTO]
Lights during Auto Edit
Recording.
[EDIT PRGM]
Lights during Program
Edit Recording.
: Lights when the A side
of the tape is designated.
: Lights when the B side
of the tape is designated.
@® PLAY/PAUSE Indicators
»
: Lights during play.
Ht:
Lights in the pause mode.
@ REPEAT
Lights when the repeat play is ready.
REPEAT _ : Lights when the repeat play
of ali the selections is entered.
REPEAT 1 : Lights when the repeat play
of only one selection is
entered.
@® TRACK
Lights when all the selections of the disc are
shown.
Shows the programmed selection numbers
or the current selection number of the disc
during programmed play.
REMOTE CONTROL UNIT
The remote control range is approximately 7
metres (23 ft.)
Pointing the remote control on an angle to the
receiver, will reduce the useful distance of the
remote control.
Use gentle but firm pressure when pressing the
remote control buttons.
If you cannot do remote control, when the disc
tray is slided out, the REMOTE SENSOR might
be blocked by the disc tray. So operate as below.
Notes:
¢ The provided remote control unit (RM-
SX261U) has operating buttons which are
basically identical with those of the CD
player. The differences are the following
button which are not on the CD player.
¢ Stop (m) button on the remote control
unit cannot cance! the programmmed
selections.
1-12 (No.20392)
@ STEP
Shows the numbers of memory steps of the
programmed selections.
@ TOTAL/EACH/REMAIN
Each time the [DISPLAY MODE] button on
the remote control unit is pressed, the indica-
tion changes in the following order.
EACH
>|TOTAL
> {TOTAL
-->|EACH
REMAIN
REMAIN
EACH __ : Shows elapsed time for the each
selection.
EACH _ : Shows the remaining playing
REMAIN
time of each selection.
(Up to
31st selection can be displayed.)
TOTAL:
Shows the elapsed playing time
of the disc or the programmed
selections.
TOTAL:
Shows the remaining playing
REMAIN
time of the disc or the pro-
grammed selections. (Up to 31st
selection can be displayed.)
@ 10 key operating buttons
To designate the desired track numbers or
establish the time interval during the tape
editing, use these buttons. If the desired
number is 10 or less, use the [1]~[10] but-
tons. However, to assign a track number
greater than 10, use the [+10] button and the
{1}]~[10] buttons.
Example
¢ To assign the 25th track, press the [+10]
button twice then press the [5] button.
@ Pause (t )
Press to stop play temporarily.
Note:
* To continue
playing, press the Play
{ » ) button again.
@ SEARCH (<< SEARCH p>)
44°:
Scans backward quickly during play.
mr
= Scans forward quickly during play.
@ REPEAT ALL/1
Press this button to play one selection, all the
selections or the programmed selections of
the disc repeatedly.
@ DISPLAY MODE
This button changes the time data in the
display window.
@ OPEN/CLOSE
Press to move the disc tray in and out.
@ PROGRAM
To program the sequence of theselections to
be played, press this button while the CD
player is in the STOP mode. The PROGRAM
= 6
@ Time indicator (MINUTE)
Shows the total playing time, elapsed playing
time, or the remaining playing time in min-
utes.
@ Time indicator (SECOND)
Shows the total playing time, elapsed playing
time, or the remaining playing time in sec-
onds.
@ Program Chart
This chart indicates the number of each
selection on the disc.
When a selection is programmed, the selec-
tion number lights.
@ DDRP INDICATORS
DDRP_:
Blinksduring DDRP operation and
lights steadily during DDAP
re-
cording.
indicator lights and up to 32 selections can be
programmed.
@ CANCEL
Press this button to cancel the programmed
tune.Each time it is pressed, one tune is
cancelled.
@ RANDOM
When this button is pressed, the CD player
will be ready for random play.
@ POWER
Press this button to turn on the power of this
set.
@ Play( > )
Press to start play.
@ Stop/Clear (mw )
Press to stop play. However, this does not
clear the program or the program edit record-
ing.
@ AUTO SEARCH/CHECK ( t<¢-4,>>4 )
<q
=: Skips to the beginning of the previ-
ous track.
pri
: Skips to the beginning of the next
track.
It can be also used to check the program
order, or to cancel part of the program.
@ INDEX
(+—): To start play from the desired index
point, scan backward to the desired
index point with this button.
(——): To start play from the desired index
point, scan forward to the desired point
with this button.
ENGLISH
Advertisement
