Advertisement
HSIONA
XL-V163TN/V 164BK
XL-V263TN/V264BK
Examples
@ PLAY pm PAUSE
Press this button to start play. If the disc
tray is out press this button, and disc
tray will then move in and play will start
(without pressing the [4
OPEN/CLOSE
button].
Press this button again to suspend play tem-
porarily. The optical pickup stops and the
disc continues to rotate. This status is called
the pause mode.
Note:
+ If the button Is pressed with no disc
loaded, the disc tray will come out.
ff the button is pressed in the standby
mode, the power will turn on and play will
start.
@ PHONES LEVEL
Adjust the volume of the head phones.
Note:
+ When
listening to music by the head-
phones, be careful not to abuse your ears
by setting the volume too high. Adjustthe
volume properly to obtain ear-pleasing
listening.
@ PHONES
Insert the headphones into this jack.
@ EDITING
When editing the disc data in the cassette
tape, the time interval can be established in
advance in accordance with the tape length.
When this button is pressed, "EDIT" appears
in the display window.
@ SIDE A/B
Use this button to designate the tape side
when programming for edit recording.
@® DDRP
Press this button for DORP recording. If the
player is connected to a DDRP system com-
patible cassette deck, when this button is
pressed, the optimum recording level is auto-
matically set and recording will start.
@® 4 OPEN/CLOSE
Press this button to move the disc tray inand
out. Press once and the disc tray will move
out; now you can load a disc. Press again to
move the tray back in. The disc is now ready
to be played.
if itis pressed during play, play will be inter-
rupted. And the program will be erased from
memory and the disc tray will come out.
Note:
+ if the power Is turned off with the disc
tray out, the disc tray will automatically
come In.
The disc tray can be moved In and out
even in the standby mode.
@ << SEARCH
When this button is pressed during play or
pause mode, the CD player will begin to scan
backwards. In such a case, when the button
is kept pressed, the CD player will backward-
search slowly for about 3 seconds, and then
go into a higher speed search.
»e SEARCH
When this button is pressed during play or
pause mode, the CD player will begin to scan
forward. In such a case, when the button is
kept pressed, the CD player will forward-
search slowly for about 3 seconds and then
go into a higher speed search.
@ @< AUTO SEARCH
Press this button to locate the start of the
current selection or to go back to the previous
selection during play. Play will go back one
selection each time the button is pushed. If
the button is held down, play will continue to
go back one selection at a time until the
button is released.
mri AUTO SEARCH
Press this button to go to the start of the next
selection. Every time this button is pressed,
the
pickup
goes
forward
by
one
selection.Holding the button down moves the
pickup forward continuously.
@ m STOP/CLEAR
Press this button to stop play. A few seconds
after the disc has stopped rotating, the player
goes into the STOP mode with the track
number "1" shown in the display window. The
player is then ready to play.
(No.20392)1-11
Advertisement
