Voyager AOM-7694 Owner's Manual page 8

AOM-7694
3. SELECT
Primary Function Input Source Select
[
SELECT -Pressing the
SELECT
button to sequence the source input modes
as indicated in Figure 2.
-Source input modes that are skipped through the menu control
function will be skipped. (Figure 3 shows sequence with
CAM/INPUT 3 skipped.)
-Source ID is indicated by OSD in the top left corner of the screen.
-Source NAME is indicated by OSD in the bottom center of the screen.
Secondary Function Menu Option Selection
-While in Menu mode, the
SELECT
button is used to select the
highlighted function or option setting.
Third Function Scan Pause / Start
-While in source "SCAN" mode, pressing the select button will stop
the scan and display the current source. "Pause" will be displayed
by OSD.
Press
SELECT
again to resume source scan.
CHI -- CH2 -► CH3 -- CH4
SPLIT(4-WAY) SPLIT(3-WAY) SPLIT(2-WAY)
Figure 2: Source Select Sequence
(Ail Source Options "On")
CHI -► CH2 -► CH4
SPLIT(4-WAY) — SPLIT(3-WAY) SPLIT(2-WAY)
Figure 3: Source Select Sequence
(CH3 "Skip")
8