Table of Contents
Advertisement
900IW+ Series Integrated Welders
1.1 About This Manual
This manual contains instructions for installing, setting up and operating a
900IW+ Series Integrated Welder (referred to as the 900IW+ or welder
throughout the manual). The first section of the manual contains basic
system and component overviews. The second section contains more
detailed control information, while the third section tells you how to install
your welder. In the fourth section you will find detailed operating
instructions.
At the front of the manual, you will find warranty conditions and warning
information regarding personal safety.
At the back of the manual, you will find Appendixes containing technical
specifications, a description of the theory behind ultrasonic welding,
listings of manufacturers of hearing protection and Branson service
centers, a "Glossary of Ultrasonic Terms," and "Assistance" should you
experience difficulties in setting up or using your welder. "Assistance" also
contains instructions for returning equipment.
For assistance in repairing or maintaining your equipment, please refer to
the 900IW+ Series Maintenance Manual. Note that Branson equipment
should be serviced only by qualified technicians using Branson-approved
test and repair equipment, repair procedures and replacement parts.
The following definitions apply in this manual:
• Note
• Caution
• Warning
Inconvenience only if disregarded — no damage
or personal injury.
Equipment damage can occur, but not personal
injury.
Personal injury can occur — DO NOT
DISREGARD.
Throughout the manual, references to switches and signals are in capital
letters (for example, HORN DOWN).
Introduction
Advertisement
Table of Contents
