Advertisement
ASSEMBLY
Assembly requires two persons. Place all parts of the exemise cycle in a cleared area and remove the packing
matedals. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench _
and Phillips screw-
driver _-.
Use the part drawings below to identifythe small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been prs-attached. If a part is not in
the parts bag, check to see if it has been pre-attached.
Note: If a part is not in the parts bag, first check to see if it has been pre-assembled. If a part is missing,
call toll-free 1-800-999-3756.
M8 Nylon
MIO Black Nylon
M8 Split
M4 x 16mm
Locknut (10)-6
Locknut (63)-4
Washer (70)-4
Screw (66)-6
M4 x 22mm
Screw (21)-2
M6 x 25.4mm Button
Screw (33)-1
M8 x 14mm Button
Screw (49)-1
M8 x 22mm Button
Screw (74)-4
M10 x 112mm Carriage Bolt (65)-4
M8 x 39mm Button
Bolt(64)-2
5
Advertisement
