Table of Contents
Advertisement
Controlling the Appliance via the Command Line
Controlling the Appliance via the Command Line
Depending on your VPN-1 Edge model, you can control your appliance via the command
line in the following ways:
•
Using the VPN-1 Edge Portal's command line interface.
See Using the VPN-1 Edge Portal on page 522.
•
Using a console connected to the VPN-1 Edge appliance.
For information, see Using the Serial Console on page 524.
•
Using an SSH client.
See Configuring SSH on page 530.
Using the VPN-1 Edge Portal
You can control your appliance via the VPN-1 Edge Portal's command line interface.
To control the appliance via the VPN-1 Edge Portal
Click Setup in the main menu, and click the Tools tab.
1.
522
Check Point VPN-1 Edge User Guide
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the VPN-1 Edge X Series and is the answer not in the manual?