Yamaha DX711 Series Manual page 48

Edit
Step Recording a Pattern
"TPT: the Pattern status display
'Step Record? TocPnxTxxx ‫ڪس‬‎
Туп] KSeTratk 1-32=Pattem
press YES to press the Ke press buttons
continue шовын 1-32 to select
select Track Pattern
(CT) те Edit Pattern Time display
лер lecord. Time=xxaxax Nole«t/oi —
з f,
=Сіоск &=Step Slider=Note NO=Exit
$Equencer
Tee next
z^
ы эш ә
The Edit Pater Time display shows you exactly where
you are within the Pattern when you Step Record.
Pressing the Key Set buttons will advance you to any
point in the Pattem where you c a n record a note with
amazing precision.
a Pressing tho LEFT Key Set button will advance
SElquencer by one "tick" of the clock. A "tick" of the
clock isthe smallest timing measure in SE!quencer
(exactly 1/24 of a quarter note.)
e Pressing the RIGHT Key Set button will advance
SEIquencer by а "note", For example, if SE'quencer is set
for 1/4 note increments (using the data entry slider),
pressing the RIGHT Key Set bution will advance the
Pattern by 1/4 noie.
Аз you advance through the Patiern, notes that are played
on the keyboard will be recorded into the Pattern at the
time indicated on the screen. For example, assume you
have a Pattern in 4/4 time. If you wart to record a legato
1/4 note on the second beat of the first bar, you simply
advance the clock until TIME=0:02:01 At this point, just
play the desired note and hold it down while advancing
the clock until TIMEs01:08:01 Release the key and it's
done.
NOTE 1: when you Step Record a Track, ALL
previously recorded notes on that Track
will be erased.
NOTE 2: SElquencer wil not record any
controller data while in
Step Record mode.
89