Yamaha DX711 Series Manual page 4

E forthe DX71II series
Selecting Voices
Selecting а ракі from ore of E's 4 memory banks is
easy. Just use the data entry buttons (+) to choose
'which bank you want Ье in. Then simply select the
patch number that you want (rom 1 to 64) and that's it.
The total number of patches the E! can store internally is
Getting started
Loading Vo.
ices
Loading patches from a cartridge or via MIDI is also easy.
First, select one of Els 4 memory banks and then select a
patch from that bank (i's О.К. if there are no patches
Stored in this bank yet - doing this simply makes the bank
"active".
DX7s owner's manual for more information) To load
into another memory bank, just select that bank, choose a
patch to make it active, and load your voices.
Voice Single
Rev ch >A >B »0mni
он off ой
Channel — »Trnsch
Messages. off
ER г Е1-15 PianoBells.
p d d
-1/NO +1/YES
use the data
Channels on ог ой, merge data, even change patch
entry buttons
numbers directly from the DX.
to select the E!
memory bank In order todo all this, ENGINE overrides the ОХУ MIDI
1 9 tm (32 6)
Select from patches 1-64
for each memory bank