Yamaha DX711 Series Manual page 30

Ө;
<
co
52
nce modes
Use this parameter to adjust each note of ће Tonal
Processor octave (C1 to C2). Each note can have а
separate setting for the three other parameters of this
menu (Key, Scale, Patter).
You can also set up an alternate tonality for each note.
The alternate settings are triggered only when that note is
pressed simultaneously with another note that is beneath
3
For example, if you have C alt set to play Patiern 2 with a
Ое in the C scale, these seuings will not be triggered If
you press the C2 rote - however, they will be triggered if
you press C2 along with any other note beneath It (B, Al,
Arete)
The Key parameter determines the "accidentals" in the
current tonal voicing key signature). Use this parameter
"o determine which notes are sharp (and fat),
'The Scale parameter determines the "mode", or starting
note, ofthe scale that will play in the KEY chosen. For
instance, if you have chosen a Key of G, the Scales that
are available are G.A,8,C,DE and F#.
transcription of each Pattern
ENGINE
»Nole »Key >Scale »Pattorn
D D D 1
Each note can have an alternate setting that is
triggered only when you press that note and
any other note beneath it simultaneously
>Note »Key »Stale Pattern
Dat Е D 2
The "D alt" settings here will trigger only if you
pressa "D' AND any note beneath it (C or C)
at the same time