Cd - Deck Synchro Recording; Connecting The Power Cord - Pioneer CT-W503R Operating Instructions Manual

CONNECTIONS
® This illustration shows CT-W503R.
Compact Dise Player
=P Heb
al |
i i
pi
Be ee CD + DECK SYNCHRO
Power cord
- Remote contro! cord
nents which you intend to connect to this unit.
Turn the power on only after making all of the connections.
Make sure that all of the connection plugs are inserted se-
curely, as improper connections may generate noise.
CONNECTING THE RECORDING AND
| PLAYBACK CORDS
@ Keep the input and output jacks connected between the ampli-
fier and this unit, otherwise, CD + DECK SYNCHRO recording
cannot be carried out.
© Even when the CD player is connected to the amplifier with an
optical fiber cable, connect the CD player to the amplifier or this
unit with the input and output cords that have pin, plugs.
| PIONEER SYSTEM REMOTE CONTROL
| Left channel
White piug
| 8 ~SEBs
Right channel
Red plug
Connect the TAPE jacks of your amplifier to the LINE jacks of the
cassette deck. Be sure to connect the REC (INPUT) jacks of the
deck to the recording (output) jacks of the amplifier, and the PLAY
(OUTPUT) jacks of the deck to the play {input} jacks of the ampili-
fier.
®@ Connect the plugs properly:
Left channel — White plug
Right channel — Red plug
| CD - DECK SYNCHRO RECORDING
(CT-W503R only)
@ CD- DECK SYNCHRO recording can be carried out when this
unit is connected to a Pioneer CD player equipped with a
CD - DECK SYNCHRO jack.
Connection
Connect the CD-DECK SYNCHRO jack of this unit to the
CD - DECK SYNCHRO jack of the CD player using the supplied
CD - DECK SYNCHRO control cord.
6
<RRBI142>
En
CONTROL IN jack (CT-W503R/CT-W403R/
CT-W263: Australian models only}
Use the enclosed Remote Control Cord to connect this jack to the
CONTROL OUT jack of another component which bears the
EE mark (indicating that it is equipped with PIONEER System Re-
mote Control}. You will then be able to operate this unit using the
Pioneer system remote contro! unit. If the remote control unit
does not have separate buttons for deck | and deck Il, or a selec-
tion button to choose deck | or deck Il, the buttons will only oper-
ate deck Il. To operate deck | with a remote control unit which was
not designed for double deck cassette decks, see page 8.
CONTROL OUT jack
intermediary jack which outputs signals fram the CONTROL IN
jack of this unit to the input jack of another unit. Connect this jack
to the CONTROL IN jack of another component compatible with
Pioneer System Remote Control.
NOTE:
Be sure to connect both of the control cora''s plugs securely to the
CONTROL IN and CONTROL OUT jacks. Do not connect only one
end of the cable.
| CONNECTING THE POWER CORD
J
insert the power cord of the cassette deck into the accessory AC
outiet of your ampiifier, or into a normal househoid outiet.