Cd Synchro Function - Pioneer CT-W801R Service Manual

* Accepted conditions
1, Output
The CPU controls in the following way using the 3 bits;GEQO,
GEQ] and GEQ2.
2. Display
Displays in the following way using the counter and meter when
the slide SW has been switched.
@ Counter display
@ Meter Display
PORTABLE
CE ee
OOOOss8OD
OFF
ONOOOoOoOOO
BEER EERE
CAR
BECUOCOSS
OOOO
3. Mechanism Mode, Mute Control and Display
Sound EQ Switching
LINE MUTE | REC MUTE Display
RPAUSE
RMUTE
X1COPY
X2COPY
Oversees Display ON
» Display OFF
9.9 CD Synchro Function
The CD synchro function sets the deck into the REC condition
and the CD player into the PLAY condition, and performs tape
copy from the CD with the one touch input of the CD SYNCRO
key on the deck side when the PIONEER CD player is connected
with a 2.5 ¢ monaural jack (2 wires) (Common GND with
AUDIO jack).
1. Accepted Conditions
* Connected to the PIONEER CD player (corresponding to CD
SYNCRO function) with the 2.5 ¢ monaural jack,and shares
the GND with the AUDIO jack.
e A REC possible tape is inserted in either side | or I], or both
sides I and J].
e When both sides I and II are in the STOP mole or only one
side is in the FF, REW modes.
2. Operations
e Operates with the input of the CD SYNCHRO Key when all
three conditions above are present. At this time, thi REC possible
side (Side I when both sides are REC possible) sarts REC with
the CD SYNCHRO key rising edge input (pess the key).
Following, the CD starts PLAY with the CD SYTNCHRO key
falling edge input (Press the key), and the deck opies from the
CD. Therefore, while the CD SYNCHRO key is bisng pressed, a
blank is created on the tape.
* During the CD SYNCHRO COPY mode, the REEC side only
accepts the STOP key and the STOP mode is sei "The opposite
side of the side recording accepts the FF, REW ad# STOP keys
and starts operating.
at
f
k