Download Print this page

Sealite SL-15 Quick Start Manual

Solar marine lantern 1 - 2nm+

Advertisement

Quick Links

Quick Start Guide
SL-15
Your system will consist of:
1 x SL-15 marine lantern and switch key
Other tools required to successfully set up this
product, are:
Internet connection
SealitePro for Bluetooth
Introduction
The purpose of this quick start guide is to present a
brief summary of the steps involved in the installation
of the SL-15 compact marine lantern, from the
physical installation of the product itself to the
configuration of its Flash Code.
Quickstart
1.
Remove the SL-15 Lantern from the packaging.
2. Check if Lantern is switched ON
(Using steps below)
3. The SL-15 is set to a Flash Code of:
0.3 seconds ON; and
2.7 seconds OFF
(Switch Position 'A' in Flash Code Table)
4. If the SL-15 lantern is preset to the ON
position it is currently in Sleep Mode.
5. To activate, expose the lantern to
30 seconds of sunlight.
6. To check lantern is working, cover the lantern in
darkness for at least 30 seconds.
7.
If you wish to alter the Flash Code please follow the
steps over the page (Adjusting the Flash Code),
otherwise proceed to install your lantern.
8. Position the lantern in your desired location
and secure, utilising the 4 x holes in the flange.
Ensure the lantern is bolted to an even, flat surface.
SL-15_BLE_QSG_EN_V2.2
sealite.com
Connectivity
®
Solar Marine Lantern
Thank you for purchasing
the SL-15
This guide will provide you
with a brief summary of the
steps involved in successfully
installing the SL-15 compact
marine lantern.
Charging the Battery
New lanterns should be left in the sun for 1-2 days to
ensure battery is charged before placing in service.
Please note, lantern will re-charge even when switch
is turned to 'OFF' position.
Preferred Installation Location
For best lantern performance, ensure solar modules
are not covered and are in clear view of the sky
with no shadows.
Download Installation
Manual
Scan the QR Code to download the
SL-15 Installation Manual from the
Sealite website.
Link to SL-15 Product Page
To access more information go to the
SL-15 product page on the Sealite
website:
marine-lanterns/1-2nm-solar-marine-lantern
1 - 2NM+
http://www.sealite.com/products/

Advertisement

loading
Need help?

Need help?

Do you have a question about the SL-15 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sealite SL-15

  • Page 1 (Using steps below) Please note, lantern will re-charge even when switch is turned to ‘OFF’ position. 3. The SL-15 is set to a Flash Code of: 0.3 seconds ON; and Preferred Installation Location 2.7 seconds OFF For best lantern performance, ensure solar modules (Switch Position ‘A’...
  • Page 2 Quick Start Guide Solar Marine Lantern SL-15 1 - 2NM+ Turning the Lantern ON Lantern Underside and Adjusting the Flash Code Battery Cover Remove the 4 x battery cover screws and lift the cover and battery out of the compartment to expose the adjustment plug.