Advertisement
Quick Links
Advertisement
Related Manuals for Kalamazoo S660MV
Summary of Contents for Kalamazoo S660MV
- Page 1 INSTRUCTION MANUAL S660MV 6” X 60” SANDER WITH VACUUM MADE IN USA...
- Page 2 Electric motors are warranted by the manufacturer and will be repaired by the nearest repair station or replaced. Defective motors are not be returned to Kalamazoo Industries. Please call for instructions (269) 382-2050. Written authorization must be obtained before returning merchandise.
- Page 3 Kalamazoo, MI 49048 Phone:(269) 382-2050 Fax: (269) 380-0790 www.kalamazooind.com Instruction sheet for S660M AND S660MV belt sanders Belt tensioning: The 6” x 60” belt sander has a preset belt tension. The yoke assembly is spring loaded for constant belt tension.
- Page 4 Kalamazoo Industries 6856 East K Ave Kalamazoo, MI 49048 Phone:(269) 382-2050 Fax: (269) 380-0790 www.kalamazooind.com Instructions continued Sanding head position: Sanding head can be positioned from vertical to horizontal with any angle in between. Loosen 5/16” socket head cap screws located above and below coupling (#36) in base (#1) while holding sander head firmly.
- Page 5 S6 YOKE ASSEMBLY INCLUDES YOKE, 960-006YA ITEM NO. ITEM NO. PART NUMBER DESCRIPTION QTY. AND SHAFT 960-006 YOKE 050-020 S6 BASE INCLUDED WITH 700-004 S6 TENSION SHAFT 560-015 S6 DRIVE PULLEY 701-018 S6 DRIVE SPINDLE ROLA018032 3/16 X 2 ROLL PIN X 2 PLACES 560-016IPA IDLER PULLEY ASSEMBLY X 2 PLACES...
- Page 6 ITEM NO. PART NUMBER DESCRIPTION QTY. CABINET FOR DCV-6 DUST 124-005 COLLECTOR BACK PANEL ASSEMBLY FOR X 2 PLACES 124-005-BACKPANEL DCV-6 CABINET HHC5025012 1/4-20 X 3/4 HHCS GR5 Z SLWZ025 1/4 SPLIT L/W Z UFWZ025 1/4 USS F/W Z X 6 PLACES DCV-6 VACUUM MOTOR MOUNT 041-015 BRACKET...