Kalamazoo S6MV Safety & Maintenance Checklist

S6MV Sander and Vacuum Maintenance Checklist
Daily Maintenance
1. Inspect the Belt: Check for wear and tear. Replace if necessary.
2. Clean the Work Area: Remove any dust and debris from the worktable and
surrounding area.
3. Empty Dust Collector: Clear out the dust collector to maintain efficient dust
extraction.
Weekly Maintenance
1. Inspect Electrical Components: Check for any loose connections or signs of wear.
2. Clean Filters: Remove and clean the dust collector filters to maintain airflow and
efficiency.
Monthly Maintenance
1. Inspect the Motor: Check the motor for any unusual noises or vibrations.
2. Check Belt Alignment: Ensure the belt is aligned correctly to prevent uneven wear.
3. Inspect Safety Guards: Make sure all safety guards are in place and functioning
properly.
Quarterly Maintenance
1. Deep Clean: Perform a thorough cleaning of the entire machine, including hard-to-
reach areas.
2. Check for Wear: Inspect all components for signs of wear and replace any worn
parts.
3. Test Performance: Run the machine to ensure it is operating at peak performance.