Table of Contents
Advertisement
HOW TO MAKE COPIES
Host Communication During Graphics Copy
You can continue communication with the host computer
during
a graphics copy
operation by
following
these steps:
1.
Be sure the dialog area is enabled before making a graphics copy:
a.
Put the terminal in Setup
b.
Enable the dialog area by entering
:
DAENABLE
YES
2.
Press the Dialog key to make any text in the dialog area invisible
.
3.
Press the appropriate key to begin the graphics
copy.
4.
Press the Dialog key again to redisplay dialog area text.
5.
Press the Setup key to remove the terminal from Setup and continue host
communications
.
Host Communication During Dialog Copy
You can continue communication with the host computer during a dialog copy
operation by following these
steps:
1.
Disable the dialog area by entering
:
DAENABLE
NO
2.
Press the Dialog key to make the dialog area invisible
.
3.
Press the DCopy key (Shift-SCopy) to begin the dialog area copy.
4.
Press the Setup key to leave Setup so you can resume working with the host in
the graphics
area.
5.
To use the dialog area when the copy is complete
,
return to Setup and
enable it:
DAENABLE YES
6.
Press the Dialog key to make the dialog area visible
.
3-12
4106/4107/4109 OPERATORS
Advertisement
Table of Contents
