Table of Contents
Advertisement
INSTALLATION AND SETUP
CONNECTING PERIPHERAL DEVICES AND
ESTABLISHING COMMUNICATIONS
The following instructions help you connect peripheral devices to the terminal and
set their communications parameters
.
You should also follow any other installation
instructions provided with the peripheral
device.
The rest of this appendix contains installation procedures
for:
•
4691 and 4692 Color Graphics Copiers
•
4695 Color Graphics Copier
•
Monochrome printers
•
4510 Color Graphics Rasterizer
•
4662 Interactive Digital Plotter
•
4663 Interactive Digital Plotter
•
4957 and 4958 Graphics Tablets
You need only refer to those procedures that apply to the device you want to install.
NOTE
Some applications programs running on
a
host computer may require
that some
peripherals,
such as a 4662 Plotter, be connected to a
specific
port.
Check with your systems programmer.
Section 3 of this manual explains the Setup commands to use for making copies
and how to use a graphics tablet.
A-12
4106/4107/4109 OPERATORS
Advertisement
Table of Contents
