Using The Color Map; Complete Color Map - Tektronix 4106 Operator's Manual

GETTING ACQUAINTED
USING THE COLOR MAP
Another way to change colors is to modify the co/or map - the part of terminal
memory that stores the color definition for all indices . When you use this method ,
the terminal displays each index along with its current HLS settings.
The terminal has eight predefined color definitions for the dialog area and 16 for
the graphics area. It assigns each of these color definitions to a color index and
displays them on the color map .
To use this method you must erase the screen . But first , activate the Set Color
function:
Press the Menu key.
Press the F1 key.
Do not move the crosshairs .
In the first method you moved the crosshairs immediately after activating the Set
Color function. In this method , you ' ll start by erasing the screen to display the color
map . Go ahead and do that now:
Press the SEras key.
The display shown in Figure 2-11 appears on the screen. The screen is divided into
three areas: the graphic indices color map , the dialog indices color map, and the
Set Color function banner. The color maps show the 16 graphics indices and the
eight dialog indices along with the HLS values and color samples for each index.
Figure 2-11. Complete Color Map.
4106/4107/4109 OPERATORS
2-27