The Set Color Banner - Tektronix 4106 Operator's Manual

GETTING ACQUAINTED
The Set Color Banner
When you press the F1 key it invokes the Set Color function . You will see a flashing
message on the screen that says , " Press SEras key to erase screen and display
current colors ." However, at this point in the exercise , do not press SEras now.
Go ahead and activate the Set Color function:
Press the F1 key.
Do not press SEras .
(If you inadvertently press another key at this point, simply press the Menu key
twice, then the F1 key to access the Set Color function .)
Notice the banner displayed across the bottom of the screen (Figure 2-7) .
Figure 2-7. Set Color Banner.
2-20
4106/4107/4109 OPERATORS