Setup Password - Omntec Proteus Series System Programming Manual

7. SETUP PASSWORD

The SETUP PASSWORD button
allows you to change the
factory-default password of
000000. Both alpha and numeric
characters can be used.
(See Figure 10.0)
8. SET ALARM MESSAGES
The SET ALARM MESSAGES
button allows you to set custom
messages for the different
alarms that are received. You
must press the SAVE button to
save any changes made.
(See Figure 11.0)
Pressing on a specific alarm box
will bring up a QWERTY keypad
for data entry.
(See Figure 11.1)
Document No.: DOC00011_A.docx
Revision Date: 11-30-2023
Figure 10.0
Figure 11.0
Figure 11.1
www.OMNTEC.com
Page 6 of 8