Changing Parameters; Communication Settings - Omntec Proteus Series System Programming Manual
Universal remote display
Hide thumbs
Also See for Proteus Series:
- System programming manual (37 pages) ,
- Programming manual (26 pages) ,
- System operating manual (24 pages)
Advertisement
3. CHANGING PARAMETERS
Pressing the
INFORMATION icon
button, ("i" in a circle) in the
upper right of the SYSTEM
SETUP page, will display and
detail what each parameter will
change within the SYSTEM
SETUP. You can change most
parameters to the user's
preference. Use this info page as
a guide to program these
parameters.
(See Figure 6.0)
4. COMMUNICATION SETTINGS
To change the BAUD RATE, select
COMMUNICATION SETTINGS from
the System Setup menu. Use the
dropdown arrows (˅) to change
COMM TYPE, BAUD RATE, PARITY,
and other options. Match these to
the main ATG. You must press the
SAVE button to save any changes
made.
(See Figure 7.0)
Document No.: DOC00011_A.docx
Revision Date: 11-30-2023
Figure 6.0
Figure 6.0
Figure 7.0
www.OMNTEC.com
Page 4 of 8
Advertisement
