Omntec Proteus Series System Programming Manual page 5

5. CHANGING TANK COLORS + ORIENTATION
Select TANK COLORS +
ORIENTATION to choose
different colors to display for
each tank. The user may also
choose to view the tank profile as
horizontal or vertical.
You must press the SAVE button
to save any changes made.
(See Figure 8.0)
6. TRANSMISSION MODE (UNIT COMMUNICATIONS MODE)
When a single MMRD7 is
connected via RS-232, RS-485, or
Ethernet, set the MMRD7 unit
mode to TRANSMITTER and the
ATG to REMOTE for that
communication type. Transmitter
mode allows the MMRD7 to poll;
it transmits commands and
receives data to and from the
ATG. You must press the SAVE
button to save any changes
made.
(See Figure 9.0)
When multiple MMRD7 are connected via RS-485 or an RS-232-422 extender, the farthest
MMRD7 from the ATG is set for TRANSMITTER and each additional MMRD7, in between, is
set for RECEIVER.
Important: Always press SAVE when you are finished making changes.
Document No.: DOC00011_A.docx
Revision Date: 11-30-2023
Figure 8.0
Figure 9.0
www.OMNTEC.com
Page 5 of 8