Advertisement
Tank Retainer
insert tank retainer into bracket and secure with wing screw.
ii!
i
#10-24x3/8" WingScrew
Qty:
Tank
Retainer
A
Burner, Firebox and Control Knobs
Place burner assembly into firebox (A). Fasten the burner assembly to the firebox using 5ram fiber washers and
#8 sheet metal screws. Insert #10-24x1-1/4" screws into each side of firebox, inside firebox attach 5ram fiber washers and
#10-24 nuts to screws,
Place firebox onto upper firebox supports. Make sure burner tubes are correctly engaged (B). If burner is not leveled from
left to right, adjust the two screws attaching valve to control panel. Attach short ignitor wire to ignitor (B),
Attach firebox with #10-24x1-1/4" screws, 5ram fiber washers and #10-24 nuts (C},
}
Push control knobs onto valve stems (C),
BurnerAssembly
Firebox
,_
Fiber Washer
I
_- #8 Sheet MetalScrew
Qty:2
#8 SheetMetalScrew
C
5ramFiberWasher
Qty: 10
O
#10-24 Nut
Qty: 8
f
#10-24x1-1/4"
Screw
Qty:8
Control
Knob
18 • 463720607.
463720807
Advertisement
