Moulinex CLICK AND MIX Manual page 8

- Remove the cooking container from the source of
heat before mixing hot preparations. For best results,
there is no need to move the mixer shaft around in
the preparation. Insert it halfway down in the middle
of the container. FIG 3
- For stringy ingredients (leeks, celery, etc.), clean the
shaft regularly during the preparation, ensuring that
you follow the safety instructions for dismantling and
cleaning the appliance.
- When making fruit-based preparations, slice the fruit
and remove the cores and any stones beforehand.
- Do not use the mixer to prepare hard ingredients
(sugar, chocolate, coffee, etc.).
- ATTENTION: Do not operate the appliance for
more than 20 seconds without stopping.
•Mini chopper 150mL (depending on model):
FIG F & 4
- Fit the blades (F2) onto the drive pin of the bowl
(F1).
- Place the ingredients in the bowl (F1) then fit the
inner cover (F3) then the cover (F4).
- Fit the motor unit (A) onto the cover (F4).
- Plug in the motor unit (A) and press the speed start
button (B).
- Remove the motor unit (A) then the cover (F4) then
the le inner cover (F3).
- Remove the blades (F2), holding it by its plastic
portion.
- After use, remove the ingredients.
- Do not operate this accessory when empty or for
more than 10 seconds.
•Mini chopper 450mL (depending on model):
FIG G & 5
- Fit the blades (G2) onto the drive pin of the bowl
(G1).
CLEANING
- All of the parts and accessories of your mixer can be
cleaned in the dishwasher except for the motor
unit (A) and the reducers (G3, H3, I1), they
are to be cleaned with a damp sponge.
- Unplug the appliance from the electrical power
supply before cleaning.
- Do not use abrasive scourers or objects containing
metal parts.
- Place the ingredients in the bowl (G1) then fit the
cover (G3).
- Fit the motor unit (A) onto the cover (G3).
- Plug in the motor unit (A) and press the speed start
button (B).
- Remove the motor unit (A) then the cover (G3).
- Remove the blades (G2) holding it by its plastic
portion.
- After use, remove the ingredients.
- Do not operate this accessory when empty.
•Mini chopper 600mL (depending on model):
FIG H & 5
- Fit the blades (H2) onto the drive pin of the bowl
(H1).
- Place the ingredients in the bowl (H1) then
fit the cover (H3).
- Fit the motor unit (A) onto the cover (H3).
- Plug in the motor unit (A) and press the speed start
button (B).
- Remove the motor unit (A) then the cover (H3).
- Remove the blades (H2) holding it by its plastic
portion.
- After use, remove the ingredients.
- Do not operate this accessory when empty.
•Multi-strand whisk (depending on model):
Fig I & 6
- Fit the multi-strand whisk (I2) onto le reducer (I1).
- Fit the reducer (I1) onto the motor unit (A).
- Turn until it is locked in place.
- After use, unscrew the reducer (I1) and remove the
whisk (H2).
- Do not immerse the motor unit (A) in water. Wipe it
clean with a dry or slightly damp cloth.
- If your accessories are discoloured by food (carrots,
oranges, etc.) rub them with a cloth soaked in
cooking oil and then clean them as usual.
- Handle the cutter and the blades with care; they
are extremely sharp.
8