Subscribe to Our Youtube Channel
Related Manuals for Anderson FF050
Summary of Contents for Anderson FF050
- Page 1 Anderson Thermal Solutions (Suzhou) Co., LTD FF050 Burner Operation Manual No： ATS–Operation Manual–FFO50 Subject:： FFO50 Burner Operation Manual V1.0 Version ： Author ： Wilson Sun Review ： David...
- Page 2 Anderson Thermal Solutions – FFO50 Operation Manual CONTENT Disclaimer Notice ..........................1 Liability And Warranty ........................1 Safety Guide ............................1 Configuration ............................2 Installation ............................2 Start-up ............................... 3 Adjustment ............................3 Stop burner............................4 Appendix............................. 5 9.1 Training Record ..........................5 9.2 Bi-annual Audit Record ........................
- Page 3 Loss of or damage to the use of materials that sell, install, use, fail to use or repair or replace Anderson related products.
- Page 4 Anderson Thermal Solutions – FFO50 Operation Manual However, it is not necessary to purge when the temperature is higher than 750°C. Air pipe or gas pipe connected with burner should be tight enough with no leakage, also the periodically check air or fuel nozzles of the burners to prevent to be blocked by dust, slag or other materials.
- Page 5 Anderson Thermal Solutions – FFO50 Operation Manual Figure 2：FFO50 Flex Fire® Oxygen Fuel burner and burner block 6. Start-up Make sure gas hose and oxygen hose are properly connected to the burner. 2. Open the oxygen shut-off valve closest to burner, let the oxygen go through the burner with 30 Nm /h as coolant to burner.
- Page 6 Anderson Thermal Solutions – FFO50 Operation Manual Figure 3: Diagram of FFO50 FlexFire® Oxygen Fuel burner adjustment knob 8. Stop burner For temporarily shut down, the burner does not need to remove from the burner brick, oxygen must continue to be supplied at the flow of 30 Nm /h as coolant.
- Page 7 Anderson Thermal Solutions – FFO50 Operation Manual 9. Appendix 9.1 Training Record Each trained person must verify that he has read and understood the contents of the operating manual and know how to operate and maintain this series of burners correctly.
- Page 8 Anderson Thermal Solutions – FFO50 Operation Manual 9.3 Annual Audit Record Yearly audit list as follow but not only included Function Audit Date Inspector Problem description Next Audit Time Leak test Pressure switch test Cable and connectors Burner bodies and air wings Attention：...
Need help?
Do you have a question about the FF050 and is the answer not in the manual?
Questions and answers