T-Fal CM730D51 Manual page 8

Table of Contents

Advertisement

Available languages

Available languages

Coffee drips on the heating plate, when
removing the carafe
On each use, the clock starts at 12:00
You cannot enter the desired settings
for automatic programming
The automatic function did not start at
the selected time
The coffee does not drip in the carafe
If your appliance still does not work properly, please call your respective country's
Customer Service.
14
PROBLEM
SOLUTION
• Place the carafe back on the heating
plate. The Pause & Serve mechanism
is blocked. Wait until the filter holder is
completely empty.
• Clean the filter holder.
• Set the clock (section 3 SETTING
THE CLOCK). The setting of the clock
will be deleted when the appliance is
unplugged or after a power failure.
• Set the clock (section 3 Setting the
clock).
• Check the setting of the clock.
• Check the start time as well as AM and
PM indicators.
• Check to make sure the water tank
is filled.
• The appliance is switched off .

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avante icon

Table of Contents