Energy Efficiency - Electrolux EOB7S31V User Manual

Hide thumbs Also See for EOB7S31V:
Table of Contents

Advertisement

Problem
The cleaning function is interrupted
before it finishes.
There is too much water on the bot‐
tom of the cavity after the end of the
cleaning function.
There is no good performance of the
cleaning procedure.
There is no good performance of the
cleaning procedure.
There is no good performance of the
cleaning procedure.
The appliance is activated and does
not heat up. The fan does not oper‐
ate. The display shows "Demo".
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. ENERGY EFFICIENCY

14.1 Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional mode
48
ENGLISH
Possible cause
The function was stopped by the
user.
You sprayed too much detergent in
the appliance before the activation
of the cleaning cycle.
The initial oven cavity temperature
of the steam cleaning function was
too high.
You did not remove the side grids
before the start of the cleaning pro‐
cedure. They can transfer heat to
the walls and decrease the perform‐
ance.
You did not remove the accessories
from the appliance before the start
of the cleaning procedure. They can
compromise the steam cycle and
decrease the performance.
The demo mode is activated.
.........................................
.........................................
.........................................
Remedy
Repeat the procedure.
Cover all parts of the cavity with a
thin layer of the detergent. Spray the
detergent evenly.
Repeat the cycle. Run the cycle
when the appliance is cold.
Remove the side grids from the ap‐
pliance and repeat the function.
Remove the accessories from the
appliance and repeat the function.
Refer to "Using the settings menu"
in "Additional functions" chapter.
Electrolux
EOB7S31V 944184891
EOB7S31Z 944184890
81.0
A+
1.09 kWh/cycle

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eob7s31z

Table of Contents