Maintenance - Snapper Z1202B Safety Instructions & Operator's Manual

MAINTENANCE
A CAUTION A
BEFORE PERFORMING ANY MAINTENANCE, TURN OFF ENGINE
REMOVE KEY AND DISCONNECT SPARK PLUGS. USE EXTREME
CARE WHEN WORKING ON MACHINERY. DO NOT WEAR WATCH
OR JEWELRY. DO NOT WEAR LOOSE FITTING CLOTHES, AND
OBSERVE ALL COMMON SAFETY PRACTICES WITH TOOLS
MAINTENANCE SCHEDULE
SERVICE
WHEN
Check drive belts -every 50 hours
2 on Z1202B, Z1203B
(20 hrs breakin)
3 on Z1402K, Z1403K, Z1404K, Z1802K, Z1803K, Z1804K, Z2002K, Z2003K, Z2004K
Check crankcase oil level - before each use
Clean grass from Hydrostat fans and cooling fans-before each use
Check air intake screen after each use
Clean grass under deck - after each use
Check tire pressure --- every 10 hours
Check battery fluid every 10 hours
Sharpen mower blades - every 10 hours
Clean air filter element - every 10 hours
Check hydrostatic transmission fluid - every 25 hours
Change hydrostat oil filter
PN
62294- every 500 hours
Models Z1203B, Z1403K, Z1404K, Z1803K, Z1804K, Z2003K, Z2004K (100 hrs breakin)
Check adjustment of P
.T.O.
Clutch- every 50 hours
(or if blades do not stop within 7
seconds from switch disengagement)
Change engine crankcase oil and filter— ----- every 25 hours
(5 hrs breakin)
Replace air filter element-
Check spark plugs -
Service battery -
annually or 500 hours
annually or 500 hours
annually or 500 hours
Replace decals when illegible. Write
SNAPPER
parts dept, for free replacement
10