Table of Contents
Advertisement
en Basic operation
13.8 Soaking laundry
Note: No additional detergent is re-
quired for soaking. The appliance
uses the filled detergent for soaking
and washing.
Requirements
The laundry is placed in the appli-
¡
ance.
→ "Loading laundry", Page 33
A programme has started.
¡
→ "Starting the programme",
Page 33
Press
approx. 10 minutes after
1.
the programme start.
The programme pauses and the
laundry can soak.
Press
after the required soak-
2.
ing time.
13.9 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press .
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 23
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press .
5.
13.10 Cancelling the pro-
gramme
Press .
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
34
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→ "Programmes", Page 27
Remove the laundry.
3.
→ "Unloading the laundry",
Page 34
13.11 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
Rinse Stop is activated.
¡
→ "Buttons", Page 25
The last rinse cycle of the set pro-
¡
gramme has ended and the laun-
dry is in the rinsing water.
Set the Spin programme or a pro-
1.
gramme for draining the water.
→ "Programmes", Page 27
Press .
2.
13.12 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.13 Put the appliance into
standby mode
Press
.
1.
Advertisement
Table of Contents
