Table of Contents
Advertisement
en Basic operation
13.8 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 28
Press
Start / Reload.
▶
The drum rotates and load detec-
a
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
The display shows the programme
a
duration or the programme end
time.
After the programme has ended,
a
the display shows: "End".
13.9 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
The programme is set.
¡
→ "Setting a programme", Page 28
The programme end time is set
¡
and activated.
→ "Buttons", Page 22
Press
Start / Reload.
1.
The activated programme end time
is paused.
Press
Finish in until the display
2.
shows the required programme
end time.
Press
Start / Reload.
3.
The changed programme end time
is activated.
13.10 Soaking laundry
Note: No additional detergent is re-
quired for soaking. The appliance
uses the filled detergent for soaking
and washing.
30
Requirements
The laundry is placed in the appli-
¡
ance.
→ "Loading laundry", Page 28
A programme has started.
¡
→ "Starting the programme",
Page 30
Press
Start / Reload approx.
1.
10 minutes after the programme
start.
The programme pauses and the
laundry can soak.
Press
Start / Reload after the
2.
required soaking time.
13.11 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press
Start / Reload.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Start / Reload.
5.
13.12 Cancelling the pro-
gramme
Press
Start / Reload.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse
programme.
Advertisement
Table of Contents
