Detergents And Care; Products; Basic Operation; Switching On The Appliance - Siemens WG56B2A0ZA User Manual And Installation Instructions

Table of Contents

Advertisement

en Detergents and care products
Detergents and care products
12 Detergents and care

products

The manufacturer's instructions for
Detergents and care products
use and dosage can be found on the
packaging.
Notes
When using liquid detergents, only
¡
use liquid detergents that are self-
flowing
Do not mix different liquid deter-
¡
gents
Do not mix detergent and fabric
¡
softener
Do not use products that have ex-
¡
pired or are highly congealed
Do not use products containing
¡
solvents, caustic agents or volatile
substances
Do not use chlorine bleach
¡
Do not use dyes regularly as fixing
¡
salt can damage stainless steel
Do not use color-bleaching agents
¡
in the appliance
Do not pour vinegar into the dis-
¡
pensers → Page 36 of the intelli-
gent dosing system

Basic operation

13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Note: If you switch the appliance on
the first time after you have connec-
ted it to the electrical system, the
switch-on process takes up to one
minute.
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press
.
32
The switch-on process takes a few
seconds.
An audible function test is carried
a
out.
Note: The lighting for the drum goes
out automatically.
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 27
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 32
Setting additional programmes
Requirement: Home Connect is set
up.
→ "Setting up Home Connect",
Page 38
Set the App Programs 
1.
gramme.
If Remote start 
Press Remote start  .
2.
The Home Connect app displays
the programmes that can be selec-
ted.
Set a programme in the
3.
Home Connect app.
If required, adjust the programme
4.
settings.
→ "Adjusting the programme set-
tings", Page 32
Start the programme.
5.
→ "Starting the programme",
Page 33
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 32
pro-
flashes,

Advertisement

Table of Contents
loading

Table of Contents