Led Charge Indications - Motorola MC31 Series Integrator Manual

2 - 6 MC31XX Series Mobile Computer Integrator Guide
Scan/Charge
Indicator
LED Bar
Charge LED
Indicator
(amber)
Mobile
Computer Slot
Spare Battery
Charging LED
Single Slot Serial/USB Cradle
Figure 2-2
When charging is complete, remove the mobile computer from the mobile computer slot.
3.
To charge a spare battery:
Connect the Single Slot Serial/USB cradle to a Motorola approved power source.
1.
Insert the spare battery into the spare battery charging slot, bottom first, and pivot the top of the battery down
2.
onto the contact pins.
Gently press down on the battery to ensure proper contact.
3.
The cradle Spare Battery Charging LED indicates the spare battery charging status. The Standard Battery
4.
usually charges in less than five hours and the Extended Life Battery usually charges in less than eight hours.
See Table 2-2
When charging is complete, press the battery clip and lift the battery out of the slot.
5.
!
WARNING

LED Charge Indications

The Single Slot Serial/USB cradle uses the amber Charge LED Indicator to indicate MC31XX battery charging
status and the Spare Battery Charging LED to indicate spare battery charging status. See
status indications.
USB Port
for charging status indications.
Do not use a tool to remove the battery.
Serial Port
Spare
Battery
Spare
Battery
Charging
Slot
Battery
Clip
Power Port
Table 2-2 for charging