Driver Installation Using The Add New Hardware Wizard - Beckhoff FC9024 Installation And Operating Instructions Manual

3.3 Driver installation using the Add New Hardware Wizard

First install Software
Install the Beckhoff TwinCAT automation software before installing the Beckhoff
Note
Ethernet card.
Installation under Windows operating systems
All screen shots of this documentation are made under Windows 2000.
Note
Under all Windows operating systems, the TwinCAT driver is installed in the same way.
After installation of the Beckhoff Ethernet card, the operating system comes up with the following
message during start-up:
Follow the instructions of the Add Hardware Wizard.
FC90xx
Installation
13