ECD M.O.L.E. EV20 Quick Reference Manual page 20

OPeRATiOn
2.
Connect the M.O.L.E. thermal profiler to
the sensors.
3.
Press the "ON" button.
4.
Place the M.O.L.E. thermal profiler in the
appropriate thermal barrier and press
the "Record" button.
5.
Close the thermal barrier making sure
the sensor wires do not get pinched and
the latch is secure.
6.
Pass the thermally protected M.O.L.E.
thermal profiler, and test product
through the process.
When retrieving
thermal profiler and test product
use caution as it may be warm.
the M.O.L.E.
dATA cOLLecTiOn
➋
➌
➍
19