Step 2: Data Collection - ECD M.O.L.E. EV20 Quick Reference Manual

STeP 2: dATA cOLLecTiOn

Never permit the M.O.L.E. thermal
profiler to
maximum
temperature, as permanent damage
may result. The warranty will not
cover damage caused by exceeding
the maximum
temperature.
1.
Attach the thermocouple sensors into
the test product. Soldering is the most
common method. This process will vary
depending on the type of data you are
trying to collect.
OPeRATiOn
exceed the absolute
warranteed internal
specified internal
➊
dATA cOLLecTiOn
18