Table of Contents
Advertisement
FusionModule2000 Smart Modular Data Center
Maintenance Guide
Figure 6-33 Electronic lock
Step 3 Install a new electronic lock and connect the monitoring cable to the new lock.
Step 4 Log in to the ECC800-Pro WebUI and choose System Settings > Access Management. Set
the access permission for the new electronic lock according to the access permission setting
for the faulty electronic lock. Then perform the Synchronize to Device operation.
Step 5 On the ECC800-Pro WebUI, choose Monitoring > System > ECC800 > Controls > Delete
device with communication failure, and click Submit.
Step 6 Check that the electronic lock functions properly.
----End
6.4.4 Parts Replacement for the Intelligent Battery Monitoring
System
6.4.4.1 Replacing an iBOX
Impact on the System
The battery data cannot be monitored.
Preparations
Procedure
Step 1 Clear the network parameters for all the iBATs managed by the iBOX to be replaced.
Issue 05 (2020-03-25)
Material: iBOX
Skill requirement: hardware installation engineers
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
81
Advertisement
Table of Contents
