Mounting The Indoor Unit; To Install The Mounting Plate - Daikin CTXM15A2V1B Installer's Reference Manual

6 | Unit installation

6.3 Mounting the indoor unit

In this chapter

6.3.1 To install the mounting plate

102
50 e d a
a Recommended mounting plate fixing spots
b Pocket for the pipe port cover
c Tabs for placing a spirit level
Installer reference guide
26
4 To re-install the cover, first attach the electrical wiring box to the hooks, close
the electrical wiring box, and re-install the screw.
6.3.1

To install the mounting plate.................................................................................................................................

6.3.2 To drill a wall hole ..................................................................................................................................................
6.3.3 To remove the pipe port cover ..............................................................................................................................
1 Install the mounting plate temporarily.
2 Level the mounting plate.
3 Mark the centres of the drilling points on the wall using a tape measure.
Position the end of tape measure at symbol " ".
4 Finish the installation by securing the mounting plate on the wall using
M4×25L screws (field supply).
INFORMATION
The removed pipe port cover can be kept in the mounting plate pocket.
a b
a
180 f1 h
361
252
c a c
46
g
96
802
f1 Measure point for piping hole center " " (to left)
f2 Measure point for piping hole center " " (to right)
g Gas pipe end
a
a a
f2 150 d
341
CTXM-A, FTXM-A, ATXM-A
Daikin room air conditioner
4P518023-17P – 2023.06
26
27
27
100
e 50
(mm)