Table of Contents
Advertisement
40
Installation
Unscrew cover plates D from the
7.
front of the machine, rotate
through 180°, screw on the oppo-
site side.
Unscrew door lock E, push down
8.
slightly and remove from the front
of the machine.
Press snap-in button F in and down,
9.
press cover down slightly and re-
move from front of the machine.
10. Change door lock E over to the op-
posite side, screw down the door
interlock.
11. On the other side, insert cover F and
allow snap-in button to lock into
place.
12. Insert loading door and hinges into recesses on the front of the machine and
screw down.
Note regarding contact protection: The machine is only secure for operations
again once all plastic parts have been inserted.
Special accessories
Intermediate installation kit for stacked washer and dryer:
Available from your Service Force Centre or your specialist dealer
These intermediate installation kits can be used to arrange the dryer and an
automatic AEG-Electrolux washing machine (60 cm wide, front loading) as a space-
saving washer/dryer stack. The automatic washing machine is at the bottom and
the dryer is at the top.
Version to be supplied:
– with extractable stacker plate 916093151
Read carefully the instructions supplied with the kit.
Installation kit for external condensate drain
Attached to your product
D
E
D
E
F
F
Advertisement
Table of Contents
