Special Accessories - Electrolux EDC 5366 User Information

7. Unscrew cover plates E from the front of the ma-
chine, rotate through 180, screw on the opposite
side.
8. Unscrew door lock F, push down slightly and re-
move from the front of the machine.
9. Press snap-in button G in and down, press cover
down slightly and remove from front of the ma-
chine.
10.Transfer door lock F to the oppositeside and
screw down.
11.Fix cover G on to the other side and allow the
snap-in button to lock in place.
12.Insert loading door and hinges into recesses on
the front of the machine and screw down.
Note regarding contact protection: The machine is
only secure for operations again once all plastic
parts have been inserted.

Special accessories

The following special accessories are available from
your Service Force Centre or your specialist dealer:
Intermediate installation kits for
stacked washer and dryer:
These intermediate installation kits can be used to
arrange the dryer and an automatic AEG-Electrolux
washing machine (60cm wide, front loading) as a
space-saving washer/dryer stack. The automatic
washing machine is at the bottom and the dryer is at
the top.
Two versions can be supplied:
– without stacker plate
– with extractable stacker plate
Installation kit for external conden-
sate drain
Installation kit (125 122 510) for direct draining of
condensate into a basin, siphon, gully, etc. The con-
densate tank then no longer has to be drained, it
must however remain in its intended position in the
machine. Refer to the "Programme options" section
for how to deactivate the EMPTY WATER (BEHÄL-
TER) display.
Max. displacement height: 1m from the base of the
dryer; max. displacement length: 3m
916.018 902
916.018 903
23