Page 1
VESA adapter Assembly instructions The VESA adapter is compatible with the following products from MSI (msi.com) compatible: MAG342CQPV, Optix AG321CQRDE, Optix MAG301CR2, Optix MAG342CQR, Optix MAG342CQRV, Optix MAG342CQRVDE The VESA adapter allows you to conveniently mount your MSI brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm).
Assembly instructions Important Safeguards Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should always be included. Failure to follow these instructions may result in injury or damage to persons or the product, for which we cannot accept any liability.
For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area. 4. Manufacturer Information 3idee Technologies S.à r.l. 5 Um Lenster Bierg L-6125 Junglinster Luxembourg 5.
Assembly instructions Horizontal / Vertical Alignment Please note: Not all VESA adapters and monitors are designed for vertical (upright) orientation. This limitation is often due to the specific geometry of the adapter or monitor. Do not ignore this information, as the load limit of the adapter can quickly be exceeded if not installed properly. We are continuously working on developing monitors and adapters that are also suitable for vertical orientation.
Assembly instructions Assembly Instruction Step 1 Place your MSI monitor on a safe, soft surface to avoid damaging it during installation. Take the M4x20 screws (screw bag SP14) and attach the VESA adapter to the back of your monitor using a screwdriver.
Page 7
Assembly instructions Step 4 Please make sure that all 4 screws are tight. (Figure 4) Figure 4...