3idee de-se2417 Assembly Instructions

Vesa adapter

Download this manual

de-se2417 VESA Adapter

Assembly

instructions

The VESA adapter is compatible with the following products from Dell (dell.com):

S2216M, S2316H, S2316M, S2317HJ, S2416H, S2717Q, S2817Q, SE2216H,

SE2416H, SE2416HSC, SE2416HX, SE2716H, SE2716H, SE2717HR,

SE2717HX and SE2417HGX.

The VESA adapter allows you to conveniently mount your DELL brand monitor to a

monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws

and dowels (not included).

www.3idee.eu

Page 1 VESA Adapter Assembly instructions The VESA adapter is compatible with the following products from Dell (dell.com): S2216M, S2316H, S2316M, S2317HJ, S2416H, S2717Q, S2817Q, SE2216H, SE2416H, SE2416HSC, SE2416HX, SE2716H, SE2716H, SE2717HR, SE2717HX and SE2417HGX. The VESA adapter allows you to conveniently mount your DELL brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm).
Page 2 Assembly instructions Assembly instruction Step 1 Place your screen in a safe, soft place so that your screen does not get damaged. Remove the base of your monitor if it is already attached. Use a screwdriver and press it into the white dot above the base.
Page 3 Assembly instructions Step 4 Now hold the VESA adapter on your monitor arm and screw it tight from behind with the other hand. (Figure 3) Figure 3 Step 5 When fully assembled, it should now look as shown. (Figure Figure 4...
Page 4 We wish you a lot of fun with your product. Your 3idee Team Responsible for this content: 3idee Technologies S.à r.l 5, ZA Um Lenster Bierg L-6125 Junglinster Luxembourg...