Operation - Tripp Lite PINV300SW-120 Owner's Manual

Operation

Operating Modes
After mounting and connecting your Inverter according to the
instructions in this manual, use the ON/OFF switch to choose the
Inverter's operating mode.
ON: When you set the switch to the ON position, the Inverter provides
AC power to connected equipment by converting DC power from your
vehicle's battery. The green LED will illuminate to indicate it is working.
OFF: Set the switch to the OFF position to shut down the Inverter
completely. Doing this will prevent it from drawing power from your
vehicle's battery. Also set the switch to the OFF position to reset the
Inverter if it has shut down due to low battery, overload or other critical
condition.
1. Connect the Inverter (see Battery Connection section).
2. Switch the Inverter's ON/OFF switch to the ON position.
3. The green LED indicator will illuminate, indicating the Inverter is
receiving power.
4. Make sure the device(s) to be operated are turned OFF.
5. Plug the device(s) into the Inverter's AC outlets.
20