Yamaha Star XVS13CG 2015 Owner's Manual page 25

Right
1
2
3
4
1. Engine stop switch " / "
2. "SELECT" switch
3. "RESET" switch
4. Start switch " "
Dimmer switch " / "
Set this switch to " " for the high
beam and to " " for the low beam.
Turn signal switch " /
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch "
Push this switch to crank the engine
with the starter. See page 6-1 for start-
ing instructions prior to starting the en-
EAU12401
gine.
The engine trouble warning light will
come on when the key is turned to
EAU12461
"
"ON" and the start switch is pushed,
but this does not indicate a malfunc-
tion.
". When
Instrument and control functions
EAU12501
" "SELECT" switch
This switch is used to perform selec-
tions in the odometer and tripmeters,
to set the clock and to set the bright-
EAU12661
/ "
ness control mode of the multi-func-
" before starting
tion meter unit.
" to
See "Multi-function meter unit" on
page 4-4 for detailed information.
"RESET" switch
EAU12713 This switch is used to reset the tripme-
"
ters, to set the clock and to set the
brightness control mode of the multi-
function meter unit.
See "Multi-function meter unit" on
page 4-4 for detailed information.
EAU41701
4-8
EAU44603
4
EAU42536