Table of Contents
Advertisement
5. Push the tabs at each end of the printhead over the tab holders on the print and
6. Pull the printhead away from the printer and complete the following steps:
7. Remove the printhead from the printer.
8. Install the new printhead, starting with the following steps:
Warning: Do not touch the printhead surface area.
PC42E-T Desktop Printer User Guide
ribbon mechanism.
a. Disconnect the cables at each end of the printhead.
b. Use a Phillips screwdriver to remove the screw attached to the grounding
wire.
a. Connect the cables at each end of the printhead.
b. Use a Phillips screwdriver to secure the grounding wire and screw.
Tab
Tab Holder
33
Advertisement
Table of Contents
