Husqvarna LT 8005 Operator's Manual page 3

14. Rammer shoe
15. Operator's manual
Throttle control
The throttle control has 3 available positions:
Operation mode position (A)
Start position/idle speed position (B)
Stop position (C)
A
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
Use hearing protection.
Use boots with steel toe-cap and non-slip
sole.
Hot surface.
1167 - 004 - 12.09.2023
B
C
The spring can eject and cause injury.
Ultra-low-sulfur diesel fuel only.
Lift the product at this part of the safety
frame.
Noise emission to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislation Protection of the Environment
Operations (Noise Control) Regulation
2017. The guaranteed sound power level
of the product is specified in
data on page 13 and on the label.
This product is in compliance with
applicable EC directives.
This product conforms to the applicable
UK regulations.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Type plate
1 2 3 4 5 6
1. Product type
2. Serial number with production date, year, week and
sequence number
3. Rated power
4. Product weight
5. Brand
6. Manufacturer and manufacturer address
7. Product number
8. Production year
Technical
7 8
3