Safety Measures - Vitek Manual instruction Manual Instruction

ENGLISH
HAIR CLIPPER VT-2518
This set is intended for cutting hair and styling.
DESCRIPTION
1. Power switch «I/O»
2. Taper lever
3. Blade block
4. 3 mm attachment comb
5. 6 mm attachment comb
6. 9 mm attachment comb
7. 12 mm attachment comb
8. Blades protective cover
9. Comb
10. Scissors
11. Lubricating oil
12. Cleaning brush

SAFETY MEASURES

Before using the unit, read this instruction manual care-
fully. Keep this manual for future reference.
Use the unit for intended purposes only, as specified in
this manual. Mishandling the unit may cause its failure
and inflict damage on the user or his/her property.
• Before using the unit for the first time, make sure that
the voltage in your mains corresponds to unit operat-
ing voltage.
• Use only the attachment combs supplied.
• Do not use the hair clipper if the attachment comb or
the blades are damaged.
• Keep the blades clean and lubricated.
• After each usage clean the blades using the brush
supplied with the unit.
• Do not leave the operating unit unattended.
• Switch the unit off during breaks in operation or when
you are not using it.
• Do not use the unit in places with high temperature
and humidity and while taking a bath or a shower.
• Do not keep the unit near a bath or a sink filled with
water. Do not immerse the unit into water or other liq-
uids; do not wash the unit under running water.
• Make sure that the cord does not touch hot surfaces
or sharp objects.
• This unit is not intended for usage by children.
14