Samsung RH68B Series User Manual page 34

Hide thumbs Also See for RH68B Series:

Table of Contents

Available languages

Installation

STEP 2 Spacing (applicable models only)

STEP 3 Flooring

If the refrigerator cannot pass through the entrance due to its size, see the Door removal

for entrance section in the Installation chapter.

Untitled-3 34

1. Open the door and locate the provided

2. Unpack the spacer and attach it to the

rear of the refrigerator as shown. It

helps ventilate air to the rear wall and

save power consumption.

• The surface to install the refrigerator

must support a fully loaded refrigerator.

• To protect the floor, put a large piece

of cardboard on each leg of the

refrigerator.

• Once the refrigerator is in its final

position, do not move it unless

necessary to protect the floor. If you

have to, use a thick paper or cloth such

as old carpets along the movement path.

Chapters

Table of Contents