Epson ES-C220 User Manual page 205

Light status
The following lights are
flashing quickly:
• ready
• Wi-Fi (ES-C320W/RR-
400W)
• AP mode (ES-
C320W/RR-400W)
• scanner position
• error
The ready light is off and
the following lights are on:
• Wi-Fi (ES-C320W/RR-
400W)
• AP mode (ES-
C320W/RR-400W)
• scanner position
• error
Network Errors (ES-C320W/RR-400W)
Light status
The Wi-Fi light is flashing
and the error light is on
The Wi-Fi and error
lights are flashing
The Wi-Fi light is flashing
blue and the error light is
flashing
Condition/solution
A fatal error has occurred. Try the following:
• Check the scanner connection to your computer to make sure it is
secure.
• Turn the scanner off and then back on again. If the error continues,
the scanner may be malfunctioning. Contact Epson for support.
The firmware update has failed and the scanner is in recovery mode.
Try the following:
• Make sure the USB cable is connected between your scanner and
computer. (During recovery mode, you cannot update the firmware
over a network connection.)
• Try updating the firmware again.
Condition/solution
An access point setting error has occurred. Press the
clear the error.
An access point setting (security) error has occurred. Press the
button to clear the error.
A network connection error has occurred (the date and time settings are
incorrect). Set the correct date and time in WebConfig.
205
stop button to
stop