SLP Settings
Setting
Enable SLP
WSD Settings
Setting
Enable WSD
Scanning Timeout (sec)
Device Name
Location
LLTD Settings
Setting
Enable LLTD
Device Name
LLMNR Settings
Setting
Enable LLMNR
SNMPv1/v2c Settings
Setting
Enable SNMPv1/v2c
Options/Description
Enable the SLP function to use the Push Scan function and
network searching in EpsonNet Config
Options/Description
Enable adding devices using WSD, and printing and scanning
from the WSD port
Enter the communication timeout value for WSD scanning
between 3 and 3,600 seconds
Displays the WSD device name
Displays the WSD location name
Options/Description
Enable LLTD to display the product in the Windows network
map
Displays the LLTD device name
Options/Description
Enable LLMNR to use name resolution without NetBIOS, even
if you cannot use DNS
Options/Description
Enable SNMPv1/v2c for products that support SNMPv3
184