Disconnecting A Battery From The J35 - BMPRO J35 + ControlNode Owner's Manual

Before using a battery other than that which was installed at the caravan dealership,
consult with the battery manufacturer for a detailed description of the installation,
uses and maintenance of the battery. Verify that the type and capacity of the battery
or batteries used are compatible for use with the J35.
Do not install a battery in the same compartment where flammable material, such as
After fitting a new battery to the J35, make sure that it is configured in the JHub
App.
Correctly configuring the battery capacity and profile will ensure that the J35
will
select the best charging parameters for the caravan battery in use, and the
software accurately estimates battery usage.

DISCONNECTING A BATTERY FROM THE J35

To disconnect a battery from the J35:
1.
Power off all loads connected to the J35, the easiest way is with the switch
connected to the J35 Load Isolation input.
2.
Turn off and remove all power sources (mains/solar/AUX) to the J35.
3.
Disconnect the battery's negative (black) terminal from the J35 Batt-
connection point.
4.
Disconnect the battery's positive (red) terminal from the J35 Batt+
connection point.
WARNING
WARNING
petrol, is stored.
17