Controlnode; Controlnode Led Flash Codes - BMPRO J35 + ControlNode Owner's Manual

CONTROLNODE

1
2
1.
PAIRING BUTTON
Button to enable Bluetooth pairing between the ControlNode and the JHub App
on your own personal mobile device or JHub Tablet.
2.
LED STATUS INDICATOR
Indicates the operational/pairing status of the ControlNode.
For more information, refer to ControlNode LED Flash Codes.
3.
CONTROLNODE SERIAL NUMBER
Required to choose the correct device when pairing the ControlNode to the JHub
App on your own personal mobile device or JHub Tablet.

CONTROLNODE LED FLASH CODES

OPERATIONAL STATUS
ControlNode is ready to pair
ControlNode memory is full,
cannot pair to any new devices
Clearing ControlNode memory*
*After memory has been cleared, the ControlNode LED Status Indicator will flash green.
FLASHING STATUS
Green flash 30 sec
To pair to a new mobile device,
Orange flash 1 sec
clear the memory of the
ControlNode
Memory will only be cleared if
Red flash 1 sec
the user presses and holds the
Pairing Button for 10 seconds.
14
3
DETAILS